Hi
I am able to replicate entity type ACCOUNT but not ACCCCDET. I mainained all necessary customization required for it with BO type also with correct implematation I am able to see ACCCCDET in MDG tables but IDOC creates only ESKA1M and skipping generation of SKB1M.
We are on MDG 7.0 FP02 and refer almost all SAP notes also which are are applicable in our system. Any clue?
Hi All,
Please can some one provide some info that Is there any way to display the attachments ( Yes or No) along with change requests/change documents in the change request tab of MDG. I am able to see all the CRs which have attachments in the table USMD1211. However need to display them in the MDG screen.
Thanks in advance.
Regards,
Sekhar
Hi All,
I'm trying to configure the UWL settings for Vendor/BP MDG Change requests .
This works fine on NWBC but need to set it up in Portal .The Portal calls the backend via ITS and then calls the webdynpro application . This is cumbersome as it opens another screen . I need this to open the Webdynpro directly .
I have done the following
Transaction SWFVISU
Task : TS75707980 ( Approval task which I'm using )
Visualisation type = WebDynpro ABAP
Parameters
APPLICATION = USMD_CREQUEST_PROCESS
Configuration = USMD_CREQUEST_PROCESS
DYNPARAM = crequest_workitem=${item.externalId} ---> this being the work item id .
namespace = SAP
SYSTEM_ALIAS = SAP
On clicking the link in the uwl I get an error that that change request has not been entered . I don't know what is the dynamic parameter for
entering the Change request . I know that the application parameter crequest exists but what is the uwl parameter . I have tried
${item.externalObjectId} and ${item.internalId} but they do not work . If I hardcode the value for application paramater say CREQUEST=312 , then it works .
However it opens the generic Change request screen from where I have to drilldown down into the BP Change request .
Any solutions ?
Regards,
Radha Subramanian
Dear Gurus,
We are using MDG application to create/change vendors.
We have few Vendor Master records which are available in ECC and are not available (i.e. BP's) in MDG.
Is there any possibility to transfer these Vendor Numbers from ECC to MDG with the same number as in ECC.
Regards,
Hari.
Hi,
Can anyone help me to get standard business content as per latest version for MDG-Material and MDG-Financial Data Models.
Thanks,
Narendra
We implemented over couple dozen BRF+ rules for the supplier, it was working well in development. But in Quality the performance has deteriorated drastically. The runtime analysis shows that BRF+ framework itself seems to take lot of time, apart from time to run the custom rules. Has anyone faced similar challenge and how was this mitigated. Has someone used BADI MDG_BS_SUPPL_VENDOR_LIKE_UI or others and got quicker results?
Can't share the trace file due to size limit.
Thanks in advance,
Kartik.
Hello guys, I have the following question: ERROR: No Component Name Specified for Component 1 (termination: RABAX_STATE)
Hi,
I have this field BVTYP (Bank Partner Type) in table LFBK. I need to add this field to Change Request screen - when I click on Create Bank Details
I added this field to the Attributes of entity BP_BKDTL in the data model BP. Executed Generate Data-Model Specific Structures, so the field BVTYP was added automatically to MDG_BS_BP_BP_BKDTL in the customer include correctly.
When I am trying to Extend the mappings in MDG_BS_BP_MAP_2STA and BP_BP_BKDTL_2API, It is not allowing me to extend the mapping in structure BUS_EI_BUPA_BANKDETAIL saying that field does not exist in the same.
I tried to add this field BVTYP to this structure using append structure but this BUS_EI_BUPA_BANKDETAIL is not enhanceable.
Until I have my field BVTYP in structure BUS_EI_BUPA_BANKDETAIL in DATA and DATAX, I cannot do the SMT mapping.
Can someone please help me as to how can I add my field BVTYP to this structure inorder to get the field on the screen. Or is there some other way to add this field to the screen?
Any inputs would be highly appreciated.
Thanks and Regards,
Vanessa
Hi
I created Edition with replication timings - After Final Approval of change request.
After this I create GL account with above edition and expect data replication in SKA1 and SKB1 after CR approval.
But it is not trigereing at all.
ALE setting is in place as I can manage to replicate data by Object transger.
Is I am missing something?
Hi experts,
I'm working with an MDG system (only MDG-S) connected to an SAP ECC separated system (Flex option).
I need to perform the same checks on MDG Change Request that now are performed on BP transaction on the ECC system and I'm trying to do it with an implementation of USMD_RULE_SERVICE badi, using the CHECK_ENTITY method.
I need to check the Change Request values using some RFC functions published by the ECC system, because there are many Z tables and developments that can't be moved to MDG, but I can't find the way to map the Change Request fields to the structures needed by the RFC functions.
As an example, here is a RFC function signature:
FUNCTION zmfmdg_bp_event_dchck_lzbkz.
*"----------------------------------------------------------------------
*"*"Interfase local
*" IMPORTING
*" VALUE(I_LIFNR) TYPE LIFNR
*" VALUE(I_BUKRS) TYPE BUKRS
*" VALUE(I_COUNTRY) TYPE LAND1
*" VALUE(I_RLTYP) TYPE RLTYP
*" EXPORTING
*" VALUE(O_RETURN) TYPE BAPIRET2
*" TABLES
*" T_LFB1 STRUCTURE LFB1
How can I use these RFC functions?
Thanks in advance,
Jordi
Hello,
we are trying to update a customer with mass change process and getting below error.
"50000346 of entity type Bus. Partner ID is still being used for value 50000346/4222577/BUR001 of entity type Relationsh.Cat."
This customer has relationship created as "has contact person" but in mass change we are updating "Central Data" entity but no contact person fields are involved in this.
Anyone has faced similar issues previously?
Thanks
Ninad
Hello,
We have a requirement to extend standard entity AD_POSTAL with custom fields and save the data in active area.
For that we have done the following steps:
1. Extend ADRC table (active area) with custom fields.
2. Extend structures BUS_EI_STRUC_ADDRESS and BUS_EI_STRUC_ADDRESS_X with custom fields. These structures will be used in SMT
mapping.
3. Extend AD_POSTAL Entity with custom fields (MDGIMG)
4. Generate data model specific structures for AD_POSTAL (MDGIMG).
5. Extend SMT mapping -
--BP_AD_POSTAL_2API
--BP_AD_POSTAL_2STA
6. Enhance UI configuration BS_BP_ADDRESS to display custom fields.
For testing, created a CR and approved it.
But data is NOT getting saved in active area i.e. ADRC table.
Please Suggest.
Hi,
I have done an implementation of BADI MDG_BS_ECC_BP_MLT_AS_OBJ_DATA on an MDG-S Hub implementation, but the Badi is not triggered despite that is active and SAP says that will be called.
Is possible that the execution of this Badi depends on additional customizing?
Thanks in advance.
Regards,
Jordi.
Hello MDG Experts,
Just wondering if it's actually possible to add approvers to the standard workflows?
We also have a requirement in our client wherein some of the finance master data objects require 2 approvers, while some require 3.
So I assume we need to assign 2 different workflows (one workflow for 2 approvers and another one for 3 approvers).
Or do you reckon I'm better off using Rule Based Workflow?
Thanks!
Hello,
I have a problem in MDG Supplier.
I have created new entity type ZSOLIC in BP model.
I have done a deep copy to the configuration name BS_OVP_SP and I have changed in customizing these points:
Link Log. Actions with UI Application and Bus. Activity: Custom Definition
Configure Properties of Change Request Step
I generate specific data model structure and execute program USMD_DATA_MODEL.
I create a new configuration id ZO_BS_BP_DATOS for FPM_FORM_UIBB_GL2. This new configuration include attributes the to new entity ZSOLIC.
Add new configuration in compositte UIBB.
When create new supplier I appear the new fields of the entity but all new fields are blocked.
Could yo explain me how I can do editable the attributes of the new entity?
Thanks!
Hi
I am Unable to locate Arrtribute PCTRCCTR in 0G data model for entity type CCTR.
As per Metadata by SAP it says complex OVS. Not understanding meaning for this also
Also domain element USMDZ1_PCTR is assigned to PCTRCCTR. But for domain element no input help is assigned.So earger to know how UI shows arrtribute with F4 help
We have a requirement to bring KUNNR field in Supplier UI.
We enabled KUNNR in genIL and also added in UI. We created a CR to make sure if the data is flowing to ECC. But it is not.
Do I have to do any mapping apart from enabling KUNNR in genIL?
http://scn.sap.com/message/15811662#15811662
Thanks,
Ramesh
Hello Experts,
I have 4 fields in UI where 2 are conditional field ( Those 2 fields values are not going to database table) and other 2 fields values goes to database table.
Q1. In the above case how to drive the value from UI field to Brf table?
Hi,
I havea problem when create a new supplier in MDG 7. I 've created a new supplier with fuction BBP000 and a company code, but when I added purchasing organizations, to display the error missage:
Fill vendor number, personnel number, or contact person number
The company code and purchasing organizations are well related. I tried to create the change request selected other fuctions (FLNV01 or FLNV00), but the message appear.
Thanks!
Hi,
I havea problem when create a new supplier in MDG 7. I 've created a new supplier with fuction BBP000 and a company code, but when I added purchasing organizations, to display the error missage:
Fill vendor number, personnel number, or contact person number
The company code and purchasing organizations are well related. I tried to create the change request selected other fuctions (FLNV01 or FLNV00), but the message appear.
Thanks!