Quantcast
Channel: SCN : Discussion List - SAP Master Data Governance
Viewing all 2047 articles
Browse latest View live
↧

Flex Entity on MDG -C/S is readonly

January 20, 2014, 2:18 am
$
0
0

Hi All,

 

I have a flex entity that i've built and when I see it on the UI, it's read only. Initially I thought I did the data model wrong or missed a step, but anyway I do this, the flex entity is still read-only.

 

I've seen one or two discussions that had this problem but the resolutions were unclear. I have also seen multiple notes among them 1772841, 1923861 which refers to the exact issue i have, only that those issues and fix relate  to MDG-M.

 

Has anyone come across the same issue when extending the BP data model with a flex entity? Would the fix be the same?

↧
Search

How to create number range per entity type - for MDGF

January 20, 2014, 2:24 am
$
0
0

Would like to know how to configure the number range for MDGF? As I understand that the number ranges are maintain in SNRO for object types. IF I like the number range there can I assign it based on CR type?

 

Kiran

↧
↧

DT_SINGLE_VAL_SUPPL1P1 (Expression) : Columns must be adapted to change of result data object S_SINGLE_VALUE

December 2, 2013, 1:01 am
$
0
0

Hi All,

 

I am facing the below error while creating the BRF tables

 

 

DT_SINGLE_VAL_SUPPL1P1 (Expression) : Columns must be adapted to change

of result data object S_SINGLE_VALUE

 

Please help in this regard.

 

Sharma

↧

How can I know how many data been extended to plant level?

January 20, 2014, 1:27 am
$
0
0

Dear all,

Currenly, I can use SE16N to mass export data from ECC.

I want to export a report which containig the field created by/create time/plant/material number.

 

Thank you very much.

 

Regards

Herry

↧

MDG-M Configuration to Print Delivered PDF Form

December 16, 2013, 4:25 pm
$
0
0

Hello,


In MDG-M 6.1, I am trying to enable the printing of a change request and tried the following configuration but without success.

 

In MDGIMG "Assign Print Forms for Single Processing", for the MM data model, I first tried:

 

UI Configuration:  Z01_BS_MAT_OVP_03 (this is my deep copy which is working in production but with no printing enabled)

Entity Type:  MATERIAL

Form:  USMD_EDITION_CREQUEST (this is the form referenced in SAP's 6.1 configuration help guide)

 

When I try using form USMD_EDITION_CREQUEST as shown above, I get the following short dump:

"CALL_FUNCTION_CONFLICT_TYPE" "CX_SY_DYN_CALL_ILLEGAL_TYPE"

"CL_MDG_BS_MAT_PDF=============CP" or "CL_MDG_BS_MAT_PDF=============CM001"

"PRINT"

 

I also see that there is another form available named MDG_BS_MAT_PDF_03.  But when I try that form, the following error is displayed:  "Cannot print the material (DATA TRANSFER TO PRINT FORM)"

 

I am hoping someone can tell me what I have missing to successfully use the "out of the box" print form.

 

Rob

↧
↧

Email Notification in SAP MDG.

January 20, 2014, 3:48 am
$
0
0

Hi ,

 

We are using BRF plus for the email notification . We are displaying CR number to the users in the email. We have to also display the fields changed in the mentioned CR along with the CR number. Need experts help. Please provide with the document if anyone have with them .

↧

Data Replication of Custom object

January 21, 2014, 3:24 am
$
0
0

Hello,

 

We are working on Data replication for custom object using Hub Architecture, Could successfully syndicate data (MDG to ECC system) using manual mode only.

 

When trying to replicate using Change mode, we could not succeed, need direction/ hint if missed any step in configuration or we need to amend our Function Module program.

 

Thanks in advance.

 

Regards,

Srihari

↧

SAP MDG developer guide

January 16, 2014, 10:56 pm
$
0
0


Hi,

I am new to the SAP MDG development .

Pls share me the suitable documents thats give me the detail step of mdg implementation.

↧
Search

How to edit UI configuration on the General tab USMD_CR_GENERAL_DATA

January 21, 2014, 7:29 am
$
0
0


Hi Experts,

 

Can you please guide me. I want to access USMD_CR_GENERAL_DATA from SE80 to edit it to correct a configuration error. I accessed it through floorplan manager before but the configuration error that does not allow me to access it from the change requests to correct the configuration error. Can you please assist. I tried to access it with package MDG_BS_BP_BOLUI. If I go to through the application configuration BS_OVP_SP_VL I can't see it there.

 

Is it stored somewhere else?

 

Thanks and best regards

 

Riaan

↧
↧

How to make fields mandatory based on Material Type in MDG-M

January 21, 2014, 9:08 pm
$
0
0

Hi MDG Experts

 

I'm seeking help regarding a challenge i have about setting up certain fields as mandatory or non-mandatory based on Material Type in MDG-Material ? Can someone please provide details on how to achieve this ?

 

 

Regards

 

Neelesh

↧

Prevent MDG users from accessing t-code XD02

January 15, 2014, 2:43 am
$
0
0

Hi

 

We are implementing MDG 6.1 for Customers in co-deployment mode, meaning users that can create a CR can also access XD02 t-code;

 

Those users have XD02 in authorization object TCD.

 

How can we prevent them from using t-code XD02? We do not want them to bypass approval workflows.

 

Thanks

↧

Specification Assignment tab in MDG-M

January 21, 2014, 3:07 pm
$
0
0

Folks,

 

Has any one come across a requirement to have specification assignment screen in MDG-M? This is a standard screen that can be enabled in ECC and comes under additional data for a material master.

I looked in the data model, but didn't find anything relevant to specification assignment.

 

If your company has EH&S requirement to have the substance number maintained in the specification assignment screen/view for a material record, how have you handled it?

 

We are implementing MDG 6.1

 

Thanks in advance!

Anand

↧

Creating CRs from IDocs

January 22, 2014, 2:03 pm
$
0
0

Hello All,

 

Is it possible to create CR from IDocs? For Initial upload, We are receiving IDocs from source system. As soon as MDG system receives IDocs with multiple customers, CR should get created for each IDoc. I have been going through the form and read some where its possible through Data Import Framework but nothing much in detail.

 

Some specific questions are:

 

1. Is this Data Import Framework will work for all master data objects(Customer, Vendor, Material and Finance)

2. Do we need any specific configuration required to receive IDocs in MDG system? In our landscape, source system is non-sap but capable of sending IDocs.

 

Please throw some light on this. 

 

 

 

Thanks,

BS

↧
↧

Validations is USMD_RULE do not run in NWBC

January 23, 2014, 5:53 am
$
0
0

Hi All,

 

I am trying to create validations which could be run on NWBC screen.

I was successfull in creating the validations is USMD_RULE and the simulation in the same screen was working as desired.

but when i try creating a CR, the validations are not being run. I have checked the link How to set any default values or to set any validation or derivation rule from BRF+ . I have also followed the Naming convention (in my case CHECK_BP_CENTRL) and have reactivated the Data model.

 

Please let me know if I am missing something

 

Regards,

Sharma

↧

PFAC rule resolution is giving job org unit but workflow is not resolving it

January 23, 2014, 2:28 am
$
0
0

hi

MDG Customer Workflow issue.

there is std workflow template - WS54300003

there is dialog task - TS75707980

std rule is the agent assignment here - 75700139

configuration for above rule is - MDGIMG - general settings - process modelling - workflow  - other workflow - Assign processor to change request step

 

if USER is assigned in above config the workflow is taking it

but if JOB is assigned then workflow is not taking it

 

we have assigned JOB to Role and Role to Userid.

 

when i simulate the rule in PFCG, it is giving result as the correct job object

 

it should work right ?

please advice, if something is wrong in config.

 

thank you in advance

bhakti

↧
Search

MDG Learning

January 23, 2014, 7:56 am
↧

Vendor Account defaults in Change Request to 8888 - Treasury Vendor

November 19, 2013, 4:12 am
$
0
0

Hi Everyone,

 

When I create a CR for Vendor the account group defaults to 8888 - Treasury Vendor. It must have something to do with a patch level because I did not expierience the problem in a previous client.

 

I have already checked if the default comes from mapping or Validation and Derivation rules and could not find anything.

 

Any Ideas would be appreciated.

 

Thanks

 

Riaan

↧
↧

Restrict Authorization from SAP_MDGS_MENU_03 and SAP_MDGS_DISP_03

January 24, 2014, 4:10 am
$
0
0

Hi Experts,

 

The note on the SAP_MDGS_MENU_03 indicates that authorization is not maintained in the role and it is only assigned to users for the portal role..

 

We have copied roles SAP_MDGS_MENU_03 and SAP_MDGS_DISP_03 roles and created Z roles from them.

 

We have assigned only these two roles to a user that we defined in our decision table as second approver but the user can still edit the Address data, tax details and Banking details even though only the 2 roles are assigned to him.

 

The requirement is that the approver should still be able to amend the Change Header details, create notes, add attachments, send requests for revision, reject and approve. Thus in the role ZMDG_MDGS_MENU_03 we must retain 02 on the activity for Type of Change requests under Sap Masterdata Governance. If we change the status to 03 all the activities mentioned is disabled.

 

Strange enough some views are disabled for editing example Purchase org, Company code and a few others

 

Any suggestions please. .

 

Thanks and best regards

 

Riaan

↧

Restrict the Entity while file Uploading

January 24, 2014, 3:00 am
$
0
0

Hello Expert,

 

I have Upload Multiple Material through multiple step for same CR number for multiple material processing CR type (MAT0A) i.e

Step-1 

If User-1(ABC) want to upload Few Entities Like (Material, Material Accounting Data, Material Costing Data , Material Valuation Data, Plant Data Basic Data & Plant ATP Data) .They Submit the CR and its goes to Next User(XYZ) .

We want to rest all the Entities restrict for User-1(ABC).

 

See below attach file:

 

Step-2

User-2(XYZ) want to upload few Entities Like (Plant Data Foreign Trade, Plant Data MRP Forecast, Plant Data MRP Lot Size, Plant Data MRP Misc., Plant Data MRP Production Planning, Plant Data MRP Stock Planning & Plant Data Purchasing) ,But now User-2(XYZ) is able to upload all the Entities (Including already uploaded by User-1(ABC) ).


See below attach file:


So can someone please provide the details how can i restrict the entity user by user, so they cant upload other entity during file upload .


Thanks

Nikhilesh

↧

out of box configuration document

January 25, 2014, 2:00 am
$
0
0

Hi,

 

I am new to MDG,  looking MDG out of box configuration document.

 

Thanks in advance.

 

Regards,

Manoj.

↧
Viewing all 2047 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>